West Vancouver Tree Permit
West Vancouver protects trees 75 cm in diameter and up, and many smaller ones. Here is when you need a permit, how view pruning is treated, and what replanting it asks for.
In West Vancouver you need a permit to cut any tree 75 cm or more in diameter measured 1.4 m up, any tree 20 cm or more on a lot being built on, six native species from 20 cm, and any tree near a creek or the shoreline. Topping, and pruning that needs a ladder or climbing gear, count as cutting. The fee is $330 for the first tree and $120 for each extra one, every application needs an arborist report, and each removal needs a replacement tree. 1, 2 Tree Care prepares and files the application for you.
Permit rules at a glance
Do I need a permit?
| Permit needed above | 75 cm diameter at 1.4 m (20 cm on lots being built on) |
|---|---|
| Permit fee | $330, plus $120 per extra tree |
| Arborist report required | Always |
| Replacement tree | One per tree, plus $1,000 security |
| Typical approval time | 2 to 3 weeks |
| Exempt without permit | Imminent danger certified by an arborist (report it within 1 business day) |
| Fine for cutting without one | Up to $10,000 per tree |
How it works
We handle the permit for you
- 01
Check the tree
We measure the trunk and check whether the District of West Vancouver protects it, and whether it sits in a protected area.
- 02
Prepare the application
Site plan, photos and, where it is required, an arborist report. We fill in the forms for you.
- 03
File and follow up
We submit to the District of West Vancouver and answer their questions. The permit fee is passed through at cost.
- 04
Work and replanting
Once the permit is issued we schedule the work, then plant or arrange any replacement trees it asks for.
Permit questions
West Vancouver permit questions
- Can you apply for the permit for me?
- Yes. We prepare and file the application with the District of West Vancouver and pass the municipal fee through at cost, listed as its own line on the estimate.
- Can I prune for a view without a permit?
- Only on trees the bylaw does not protect. On a protected tree, topping and any limb removal that needs a ladder, lift or climbing gear count as cutting, so they need a permit. Vista pruning and crown reduction can be permitted with an arborist report, and the District may approve pruning instead of a removal.
- Which trees are protected?
- Any tree 75 cm or more in diameter measured 1.4 m above the ground, or 20 cm on a lot being developed with a new house or subdivided. Arbutus, Garry oak, Pacific yew, Pacific dogwood, yellow cedar and shoreline shore pine are protected from 20 cm. So are trees within 15 m of a creek bank or the high-tide line, heritage trees, replacement trees and trees with active nests.
- What if I cut a tree without a permit?
- Each tree is a separate offence, with a fine of up to $10,000 per tree on conviction, and the District can order replacement planting. If you are unsure whether a tree is protected, ask before anyone cuts.
Other permit guides
Working somewhere else on the North Shore?
- City of North VancouverWhich lots are exempt, the 20 cm threshold, fees, replacement trees and what we file for you.Read the guide
- District of North VancouverLarge and protected trees, stream and slope areas, when an arborist report is mandatory, and fees.Read the guide
- Lions BayWhy trees on your own lot need no permit, the boulevard rule, fees and the spring nesting window.Read the guide
- VancouverThe 20 cm threshold, why dead trees need a permit too, fees, the arborist report and replacement trees.Read the guide
- BurnabyThe conifer and broadleaf thresholds, streamside trees, fees and how many replacement trees you plant.Read the guide
- CoquitlamThe two-trees-a-year allowance, steep slope and streamside rules, fees and replacement trees.Read the guide
Not sure if your tree needs a permit?
Free written estimate. We check the bylaw and tell you before any work starts.