Village of Lions Bay Tree Permit
The Lions Bay tree bylaw covers Village land only. Trees on your own lot need no Village permit. Trees on Village land, including the boulevard by your road, do.
In the Village of Lions Bay, trees on private property are the owner’s responsibility and need no Village permit. The tree bylaw covers municipal land, including the strip between your property line and the road. There, cutting, pruning or topping a tree over 20 cm in diameter measured 1.4 m up (10 cm for arbutus, Pacific dogwood and western yew) needs a permit approved by Council. The application fee is $75, and no cutting is allowed from March 26 to August 16 unless the tree is hazardous. 1, 2 Tree Care prepares and files the application for you.
Permit rules at a glance
Do I need a permit?
| Permit needed above | Village land only: 20 cm diameter at 1.4 m |
|---|---|
| Permit fee | $75, plus $500 damage deposit |
| Arborist report required | Only if the Village asks |
| Replacement tree | Replanting plan where relevant |
| Typical approval time | Goes to Council; no set time |
| Exempt without permit | Private land; dead or hazardous trees on Village land |
| Fine for cutting without one | From $1,000 for the first tree, $3,000 each after |
How it works
We handle the permit for you
- 01
Check the tree
We measure the trunk and check whether the Village protects it, and whether it sits in a protected area.
- 02
Prepare the application
Site plan, photos and, where it is required, an arborist report. We fill in the forms for you.
- 03
File and follow up
We submit to the Village and answer their questions. The permit fee is passed through at cost.
- 04
Work and replanting
Once the permit is issued we schedule the work, then plant or arrange any replacement trees it asks for.
Permit questions
Lions Bay permit questions
- Can you apply for the permit for me?
- Yes. We prepare and file the application with the Village of Lions Bay and pass the municipal fee through at cost, listed as its own line on the estimate.
- Do I need a permit for a tree on my own lot?
- No. The Village tree bylaw applies to municipal land only, and trees on private property are the owner’s responsibility. Trees on the Village land between your property line and the road are covered, and so are trees in parks and on other Village land.
- What if I cut a tree on Village land without a permit?
- The fine starts at $1,000 for the first tree and $3,000 for each one after, and more for significant trees. Each tree is a separate offence. If you are unsure where your lot line is, ask before anyone cuts.
Other permit guides
Working somewhere else on the North Shore?
- City of North VancouverWhich lots are exempt, the 20 cm threshold, fees, replacement trees and what we file for you.Read the guide
- District of North VancouverLarge and protected trees, stream and slope areas, when an arborist report is mandatory, and fees.Read the guide
- West VancouverThe 75 cm and 20 cm thresholds, view pruning rules, fees and replacement planting.Read the guide
- VancouverThe 20 cm threshold, why dead trees need a permit too, fees, the arborist report and replacement trees.Read the guide
- BurnabyThe conifer and broadleaf thresholds, streamside trees, fees and how many replacement trees you plant.Read the guide
- CoquitlamThe two-trees-a-year allowance, steep slope and streamside rules, fees and replacement trees.Read the guide
Not sure if your tree needs a permit?
Free written estimate. We check the bylaw and tell you before any work starts.